Force / Load / Pressure Sensing

We provide a full range of sensors or transducers to measure physical variables of load/force, pressure and torque. The electric output signals from the sensors are connected to various measuring instruments to measure, monitor and record these physical variables.

 

Pressure

Featured Products

Load Cell

btn_loadcells Piezoresistive sensor

KYOWATM load cells and weighing sensors (strain gage based) are designed to meet all industrial needs, including models for compression and tension applications; explosion-proof models usable in environments containing hazardous liquids, gases; washer type models for measuring rolling pressure, etc.

Compressive Load Measurement

Small-size Compression Load Cell

  • Measurement range: 5 N to 50 kN
  • Diameter size range: 10 mm to 50 mm

Models: LMA-A LMB-A LMBT-A LCX-A-ID LCN-A LMR-S-SA2 LMC-A

Beam-type Compression Load Cell

  • Measurement range: 50 N to 20 kN
  • Suitable applications: Weighing systems for conveyors and tanks.

Models: LUB-B LUB-C

High Temperature Compression Load Cell

  • Measurement range: 500N to 200 kN
  • Diameter size: 68 mm (500 N to 20 kN), 116 mm (100 kN), 156 mm (200 kN)
  • Operating temperature: Up to 150°C (excluding connector)

Model: LC-FH

Small size, Large capacity Compression Load Cell

  • Measurement range: 10 kN to 50 kN
  • Diameter size: 20 mm (10 to 30 kN), 25 mm (50 kN)
  • Suitable for installation inside cylindrical objects.

Model: LCR-G-SA2

Explosion-proof Compression Load Cell

  • Measurement range: 5 kN to 50 kN
  • Size: 171 mm

Model: LCS-D

High Accuracy Compression Load Cell

  • Measurement range: 100 kN to 1 MN
  • Diameter size: 156 mm (100 kN), 146 mm (1 MN)

Model: LCV-A LCH-F

General Purpose Compression Load Cell

  • Measurement range: 2 MN to 5 MN
  • Diameter size: 210 mm (2 MN), 240 mm (5 MN)

Model: LC-E

Corrosion-resistant Compression Load Cell

  • Measurement range: 5 kN to 200 kN
  • Degree of Protection: IP67

Models: LC-J LC-V LCH-F

Thin-size Compression Load Cell

  • Measurement range: 5 kN to 20 kN
  • Thickness size range: 25 mm to 50 mm
  • Degree of Protection: IP67

Model: LCK-A

Compression Load Cell for Weighing Tank and Hopper

  • Measurement range: 500 N to 300 kN
  • Degree of Protection: IP67

Model: LCTS-B LCTA-A LCTB-A LCTE-A LCTD-A

Tensile Load Measurement

Small-capacity Tensile Load Cell

  • Measurement range: 50 mN to 20N
  • Measure load in vertical or horizontal direction.

Model: LVS-A LTS-A

High Accuracy Tension Load Cell

  • Measurement range: 500 N to 50 kN
  • Usable also for compressive load measurement (with extra calibration and accessories).

Model: LTZ-A

High Temperature Tension Load Cell

  • Measurement range: 500 N to 50 kN
  • Operating temperature: -10 to 150°C (excluding connector)

Model: LT-FH

Low Temperature Tension Load Cell

  • Measurement range: 500 N to 50 kN
  • Operating temperature: -200 to 80°C (excluding connector)

Model: LT-FL

Tensile & Compressive Load Measurement

Small capacity Tension & Compression Load Cell

  • Measurement range: ±50 N to ±200 N
  • Diameter size: 90 mm

Model: LU-A

Compact Tension & Compression Load Cell

  • Measurement range: ±50 N to ±20 kN
  • IP67 rating
  • High operating temperature (up to 150°C) available.

Model: LUR-A-SA1 LUX-B-ID

Tension & Compression Load Cell

  • Measurement range: ±500 N to ±200 kN
  • Inert gas hermetically sealed structure to ensure reliability and stability for long period of time.

Model: LU-E

High-accuracy Tension & Compression Load Cell

  • Measurement range: ±500 N to ±200 kN
  • Inert gas hermetically sealed structure to ensure reliability and stability for long period of time.

Model: LUH-F

Large Capacity, Thin-size Tension & Compression Load cell

  • Measurement range: ±5 kN to ±2 MN
  • Thin size
  • IP64 rating

Model: LUK-A

Special Purpose Load Measurement

Load Cell For Tension Meter

  • Measurement range: 5 kN to 100 kN
  • IP64 rating
  • High operating temperature up to 120°C

Model: LCR-B-S7

Washer Type Load Cell For Rolling Mill

  • Measurement range: 1 MN to 5 MN
  • IP64 rating
  • Easy installation to existing rolling mills

Model: LCW-D-S LCW-E-S

Washer Type Load Cell

  • Measurement range: 10 kN to 300 kN
  • Suitable for bolt tension control, press forming, etc..

Model: LCW-C-SA3

Pin Type Load Cell

  • Measurement range: 10 kN to 500 kN
  • Compact, space saving design for mounted in place of the axis of crane’s pulley.
  • For measurement of crane’s lifting loads.

Model: LTP-S-S

Jack Load Cell

  • Measurement range: ±10 kN to ±2 MN
  • For measure loads applied to jacks when lifting up or moving large machinery or structure.

Model: LUR-B-SA1

One-end Revolving Tension Load Cell

  • Measurement range: 20 kN to 50 kN
  • For measurement of tensile force of ropes.

Model: LTR-S-SA1

Crane Load Cell

  • Measurement range: 20 kN to 500 kN
  • For jib crane weighing systems and for general tension measurement.

Model: LTA-C-S

Rectangular Compression Load Cell

  • Measurement range: 30 kN to 100 kN
  • For weighing systems of cranes or for general compression measurement.

Model: LCD-A

Multi-Axis Force Sensor

3-Component Force Sensor

  • Measure force in X, Y and Z directions.
  • Force measurement range (FX, FY and FZ): 10 N to 500 N
  • Compact & Lightweight design.

Model: LSM-B-SA1

6-Component Force Sensor

  • Measure force and moments in X, Y and Z directions.
  • Force measurement range (FX, FY and FZ): 300 N
  • Moment measurement range (MX, MY and MZ): 10 Nm / 20 Nm
  • Includes Signal processor model FDP-106A

Model: LAT-1000A

Compact 6-Component Force Sensor

  • Measure force and moments in X, Y and Z directions.
  • Force measurement range (FX, FY and FZ): 1,000 N or 3,000 N
  • Moment measurement range (MX, MY and MZ): 50 Nm, 50 Nm and 25 Nm / 100 Nm, 100 Nm and 50 Nm

Model: LFM-A

Compact 6-Component Force Sensor with Built-in Amplifier

  • Measure force and moments in X, Y and Z directions.
  • Force measurement range (FX, FY and FZ): 1,000 N or 3,000 N
  • Moment measurement range (MX, MY and MZ): 40 Nm, 40 Nm and 25 Nm / 100 Nm, 100 Nm and 50 Nm

Model: LFX-A

Dynamic Force Sensor

DYTRANTM force sensors (piezoelectric IEPE or Charge based) are designed for dynamic force measurements, suitable for applications of general purpose, modal and structural analysis, press monitoring, process control, etc.

General Dynamic Force Sensor

  • Compression Force measurement range: 10 Lbf to 50,000 Lbf
  • Tension Force measurement range: 10 Lbf to 1,000 Lbf
  • Operating temperature: -73°C to 121°C
  • High natural frequency
  • Miniature, lightweight size models available.

Detail

High Temperature Dynamic Force Sensor

  • Compression Force measurement range: 5,000 Lbf to 100,000 Lbf
  • Tension Force measurement range: 500 Lbf
  • High natural frequency
  • Operating temperature range: -51°C to 204°C …. -73°C to 260°C

Detail

Pressure Sensor

KYOWATM pressure transducers convert liquid or gas pressures into equivalent analogue output electric signal. The pressure transducers are based on highly precise dedicated self-temperature compensated strain gages incorporated as pressure sensing elements and feature a hermetically-sealed structure with inert gas filled in, ensuring highly precise and stable pressure measurement for a long period of time.

General Purpose Pressure Sensor

Low Pressure Transducer

  • Measurement range: 20 kPa to 100 kPa
  • Operating temperature : -10°C to 60°C

Model: PGM-G

Small-size Pressure Transducer

  • Measurement range: 200 kPa to 50 MPa
  • Sensing surface diameter 5.5mm
  • Flush diaphragm type available

Model: PGMC-A PG-U PGM-H PGL-A PGM-E PGS-A PGM-D

High Pressure Transducer

  • Measurement range: 50 MPa to 300 MPa
  • IP64 rating model available
  • • High operating temperature model up to 150°C

Model: PG-H PGH-S-100MPSA17 PGH-S-300MPSA19

High / Low Temperature Pressure Sensor

High / Low Temperature Pressure Transducer

  • Measurement range: 1 MPa to 50 MPa
  • Operating temperature : -196°C to 200°C

Model: PHB-A

High / Low Temperature, Small-size Pressure Transducer

  • Measurement range: 1 MPa to 50 MPa
  • Operating temperature: -40°C to 150°C …. -196°C to 200°C

Model: PHL-A PHF-S-S1 PHF-S-SA2 PHF-S-SA4

High Temperature Flush Diaphragm Pressure Transducer

  • Measurement range: 2 MPa to 20 MPa
  • Operating temperature : 23°C to 230°C

Model: PHC-B

Absolute High Pressure Sensor

Absolute Pressure Transducer

  • Measurement range: 200 kPa to 2 MPa
  • Measurement from Absolute Pressure Zero (Vacuum)
  • Conform to MIL-STD-81°C standard

Model: PAB-A

High Reliable Pressure Transducer (Sputter Gage Method)

  • Measurement range: 200 kPa to 20 MPa
  • Long term stability at 200°C

Model: PHS-B

High-Pressure-Resistant Pressure Transducer

  • Measurement range: 1 MPa to 20 MPa
  • Critical overload (without causing damage to sensor structure): up to 196.1 MPa

Model: PGR-A

Engine Pressure Sensor

Engine Pressure Transducer

  • Measurement range: 3 MPa
  • Operating temperature : Up to 300°C, with water-cooled
  • Measurement of Engine burning pressure

Model: PE-30KF

Pressure Transmitter

Pressure Transmitter (Current Output)

  • Measurement range: 200 kPa to 50 MPa
  • Output current: 4 to 20 mA

Model: PAG-2KA PAA-R/U PAL

Pressure Transmitter (Voltage Output)

  • Measurement range: 500 kPa to 50 MPa
  • Voltage output: 0 to 5V, 1 to 5V

Model: PAV-R/U PVL

Differential Pressure Sensor

Minute Differential Pressure Transducer

  • Measurement range: 1 kPa to 7 kPa
  • For Wind Pressure Measurement

Model: PDS-A PDV-A

Differential Pressure Transducer

  • Measurement range: 10 kPa to 200 kPa
  • Maximum Line Pressure: 2.94 MPa

Model: PD-A

Stainless Steel Differential Pressure Transducer

  • Measurement range: 50 kPa to 2 MPa
  • Maximum Line Pressure: 30 MPa

Model: PDU-A

Miniature-Size Pressure Sensor

Miniature Pressure Sensor

  • Measurement range: 20 kPa to 7 MPa
  • For distributed pressure measurement.
  • Suitable medium: Gas or Oil

Model: PSS PS PSM-AB

Dynamic Pressure Sensor

DYTRANTM pressure sensors (piezoelectric IEPE or Charge based) are designed for dynamic pressure measurements, suitable for applications of general purpose monitoring, pipeline leak detection, blast/shock pressure testing, industrial acoustic studies, etc..

General Purpose Dynamic Pressure Sensor (IEPE type)

  • Measurement range: 50 psi, 100psi or 500 psi
  • Sensitivity: 100 mV/psi, 50 mV/psi or 10 mV/psi
  • Operating temperature: -40°C to 121°C

Detail

High Sensitivity Dynamic Pressure Sensor (IEPE type)

  • Measurement range: 2.5 psi
  • High sensitivity of 2,000 mV/psi
  • Operating temperature: -51°C to 121°C
  • Suitable for general purpose, airbag, transmission testing.

Detail

High Sensitivity Dynamic Pressure Sensor (Charge type)

  • Measurement range: 10 psi
  • High sensitivity of 600 pC/psi
  • Operating temperature: -51°C to 260°C
  • Suitable for high intensity sound pressure level, industrial turbine pressure measurements.

Detail

Torque Sensor

Kyowa Torque TransducerKYOWATM torque transducers are based on strain gage sensing element. The torque transducers convert torsion (surface shearing stress) corresponding to a torque of the shaft to an equivalent analogue output electric signal, and then output signals through its slip ring, brush, rotary transformer and photo transmittance.

Small-size Torque Transducer

  • Measurement range: 0.2 Nm to 2 Nm
  • Maximum rotation speed: 4,000 rpm
  • Slip ring type
  • Small size

Model: TP-D TP-E

High Speed Torque Transducer

  • Measurement range: 0.2 Nm to 5 Nm
  • Operating rotation speed: 3,000 to 15,000 rpm
  • Slip ring type

Model: TP-M

Torque Transducer with Built-in Amplifier

  • Measurement range: ±1 Nm to ±5 kNm
  • Maximum rotation speed: Up to 15,000 rpm
  • Built-in amplifier with ±5V output.

Model: TPS-A

Highly Rigid Torque Transducer

  • Measurement range: ±500 Nm to ±50 kNm
  • High torsional stiffness.
  • Non-contact design without slip rings or bearing.
  • Built-in amplifier with ±10V output and (12±8mA) current output.

Model: TPH-A

Non-Revolving Type Torque Transducer

  • Measurement range: ±10 kNm
  • Compact, Lightweight size
  • Easily install with bolts on the flange.

Model: TPR-S-10KNMSA48